The BL2 Biomass Moisture Meter Kit is the most versatile biomass moisture meter kit available. It is specifically developped for users that have to check a large variation of biomass materials. By use of two different probes it can measure wood chips, sawdust, pellets, round wood, splitt logs, Hay bales and straw bales. This Biomass Moisture Meter contains several moisture calibration curves that are activated by connecting the appropriate probe. Measuring results are displayed instantly and are temperature compensated. The image on the left shows the gauge with the hammer probe with the 255mm Hay & Straw Pins attached.When this probe fitted with the nails it can be used for round wood and splitt logs.
Below the picture of the wood chip probe that can also be used for pellets and saw dust.
The BL2 can also be supplied with an USB interface (BL2-USB-KIT) and is supplied with USB cable and Software.
Measuring Range up to 60%
Automatic temperature compensation
Temperature can be set to °C or °F as required
Measurement within seconds
Large illuminated LCD display
Rubber protection cover
Display Language: English, German, French, Italian, Spanish and Russian
up to 60% water content depending on material and probe type (represents 100% wood moisture)
0.1% water content
± 2.5 %
Material Temperature Range
0° - 40° C (temperature range for determination of water content with temperature compensation)
-10°C to 80°C
English, German, French, Italian, Spanish and Russian
Plastic with rubber protection cover, IP40 rating
10,000 moisture measurements plus date, batch & temperature
Data Interface (BL2-USB only)
USB (supplied with data transfer cable & software)
Graphic LCD display with backlight (128 x 64 pixel)
4 x 1.5 Volt AA Alkaline batteries
900 measurements (with auto-off after 6 minutes of non-use)