When the Tramex Hygro-i2 Probe is plugged into the MRHIII or CMEXpertII, the instrument automatically changes to Hygrometer Mode. The Tramex Hygro-i2 Probe provides the ideal solution for measurement of humidity, temperature and dew-point in structural materials such as concrete flooring, walls, etc., as well as the environmental conditions.
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the ﬂooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals.
The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The conﬁdence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level.
Hygro-i2 Probes are available in packs 1, 3, 6, 12 and, 25. Product Codes HIPP1, HIPP3, HIPP6, HIPP12, HIPP25.
Used in conjunction with the Tramex CMEX5, CMEX2, MRH3 non-destructive moisture meters or the Feedback Datalogger DL-RHTX, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete ﬂooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.
The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.
Please note that the RHIE2 Electronic Interface Cable is needed to connect the Hygro-i2 Probe.
|Range:||0 to 100%RH|
|Accuracy:||0% to 99%RH ±2.0%RH @ 25ºC|
|Resolution:||0.1% over the complete range|
|Drift:||<0.25%RH per year|
|Range:||-40ºC to 125ºC|
|Accuracy:||±0.1 °C Range 20°C to 60°C|
|Sensor Protection:||PTFE Film protects sensor opening from water & dust|