Show all products
Contact 
Contact Us
Checkline Europe

HTG Series - Handheld Type Digital Torque Gauge


The HTGA versions are currently not available

The HTG-Series Digital Torque Gauge is equipped with an electro luminescent display, which is highly visible in dark locations. It is a very user friendly handheld torque meter with his easy-to-use menus. It has multi-language program menus: English, Spanish, French, Chinese, German, Italian, Korean and Japanese.
The HTG-Series Digital Torque Gauge can be used for measuring the torque of:
  • Screws
  • Components
  • Drive shafts
  • Plug connectors
  • Etc.
Electro luminescent EL display shows torque value, unit, and peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, torque angle, etc.

Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high.

Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is required to record at speeds up to 2,000 data per second.

Save data to USB flash drives. Export peak data or capture continuous data at 100 data/second to flash drives with HTGA models.

The included data logger software ZT-Logger downloads data from the gauge memory or captures a continuous stream of data at 10 data/second. (You can make a graph with Excel later). Zero the gauge or capture data while at the computer. All gauge programming can be set and saved from the software.

The HTG-Series Force Gauge are available in 2 versions:
Series HTGS (Standard) & Series HTGA (Advanced)

The HTGA versions are currently not available

The HTGA (advanced) has more useful functions:
  • 1st/2nd peak
  • Angle detection at torque peak value (*1)
  • Angle zero reset at selected torque(*1)
  • Sub comparator 2 steps (output of large or small judgment)
  • Angle (displacement) (*1)
Even in the case when you cannot connect PC during measurement, you can save data in USB flash drive, and later transfer data to PC via the USB drive. On PC you can draw the data into a graph with Excel.

(*1) Angle(displacement) function is required (Only HTGA).

Features

  • Selectable units: lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm.
  • Selectable units: lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm.
  • USB (virtual COM port), RS-232C, Digimatic and Analog outputs
  • External switch display hold and clear
  • Real time and peak mode (selectable)
  • Overload capacity 200% of F.S
  • Programmable high/low setpoints with color-coded LED indicators and output signal for quick Go/No Go testing
  • Sample and transmit 2,000 data/sec using optional Force Recorder software
  • Internal Ni-MH batteries or AC adapter
  • Overload alarm and output signal
  • 1,000 data memory for recall or download

Complete Kit

Kit includes:
  • 6.5mm chuck,
  • ZT Logger data acquisition software,
  • USB cable,
  • Allen wrench,
  • AC adapter/charger,
  • calibration certificate traceable to NIST and
  • carrying case (handles for "85" range only).

Optional: 13mm Jacobs chuck available

HTG-Series Feature Comparison Chart

Electroluminescent display (ELD)
Functions
HTGS
HTGA
Peak hold (clockwise and counter-clockwise)
Comparator (judgment of OK or NG)
Reversible display
Sign inversion
Multi display
Internal memory
1000 data
1000 data
+/- Force
Auto zero timer
+NG alarm
Auto shut off
Time display
1st/2nd peak
-
Angle detection at torque peak value (*1)
-
Angle zero reset at selected torque (*1)
-
Output
HTGS
HTGA
Serial (RS232C)
Mitutoyo digimatic [*2]
Analog
2 VDC (D/A)
2 VDC (D/A)
USB
Comparator 3 steps (-NG/OK/+NG)
Overload warning
Sub comparator 2 steps (output of large or small judgment)
-
Memory in USB flash drive
[USB flash drive is not included]
-
Angle(displacement) (*1)
-


(*1) Angle(displacement) function is required
(*2) Not always available for Mitutoyo digimatic products
 


Chuck Sizes & Min / Max Sample Diameters

Model Standard Optional (*L)
HTGS-4 4.0mm / 0.157" NA
HTGS-15 6.5mm / 0.260" 13mm / 0.512"
HTGS-40 6.5mm / 0.260" 13mm / 0.512"
HTGS-85 6.5mm / 0.260" 13mm / 0.512"
*For 13mm Chuck add "-L" to part # ie: HTG2-15L

 

 

Min/Max Sample Diameters
Chuck Size Min Sample Max Sample
6.5mm / 0.260" 0.5mm / 0.020" 6.5mm / 0.260"
13mm / 0.512" 0.7mm / 0.028" 13mm / 0.512"

Specifications

Accuracy
± 0.5% Full Scale ± 1 LSD
Selectable Units
lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm
Overload warning
Approx. 110% F.S. (Warning message and alarm )
Overload Capacity
200% of F.S.
Power
Rechargeable Ni-MH battery pack or AC adapter
Battery Indicator
Indicates three charge states high, med and low
Memory
Non-volatile, recall up to 1,000 data
Setpoints
Programmable high/low setpoints w/ color-coded LEDs & output signal
Outputs
USB (virtual COM port), RS-232C, Digimatic and ± 2 VDC analog output
Operating Temperature
0° to 40°C
Weight
Display : approx.490g
Warranty
1 year

Downloads


Tension Ranges

Model Ranges Capacity Resolution Included Chuck Size Included Handle
HTGS-4 / HTGA-4 4 lbf-in
5 kgf-cm
50 N-cm
4,000 lbf-in
5,000 kgf-cm
50,00 N-cm
0.01 lbf-in
0.001 kgf-cm
0.01 N-cm
4 mmNo
HTGS-15 / HTGA-15 15 lbf-in
20 kgf-cm
200 N-cm
2 N-m
1,00 lbf-in
20,00 kgf-cm
200,0 N-cm
2 N-m
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
6.5 mmNo
HTGS-15L / HTGA-15L 15 lbf-in
20 kgf-cm
200 N-cm
2 N-m
1,00 lbf-in
20,00 kgf-cm
200,0 N-cm
2 N-m
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
13 mmNo
HTGS-40 / HTGA-40 40 lbf-in
50 kgf-cm
500 N-cm
5 N-m
40,00 lbf-in
50,00 kgf-cm
500,0 N-cm
5 N-
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
6.5 mmNo
HTGS-40L / HTGA-40L 40 lbf-in
50 kgf-cm
500 N-cm
5 N-m
40,00 lbf-in
50,00 kgf-cm
500,0 N-cm
5 N-
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
13 mmNo
HTGS-85 / HTGA-85 85 lbf-in
100 kgf-cm
1000 N-cm
10 N-m
85,0 lbf-in
100,0 kgf-cm
1000 N-cm
10 N-m
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
6.5 mmYes
HTGS-85L / HTGA-85L 85 lbf-in
100 kgf-cm
1000 N-cm
10 N-m
85,0 lbf-in
100,0 kgf-cm
1000 N-cm
10 N-m
0.01 lbf-in
0.01 kgf-cm
0.1 N-cm
0.001N-m
13 mmYes

Buy Now

Products


Product name
Price
Quantity
HTGS-4 Digital Torque Tester (Jacobs Chuck) (70oz-in, 4 mm Chuck)
€ 1.829,00 
   
HTGS-15 Digital Torque Tester (15 lb-in, 6.5 mm Chuck)
€ 1.608,00 
   
HTGS-15L Digital Torque Tester (Jacobs Chuck) (15 lb-in, 13 mm Chuck)
€ 1.714,00 
   
HTGS-40 Digital Torque Tester (Jacobs Chuck) (40 lb-in, 6.5 mm chuck)
€ 1.608,00 
   
HTGS-40L Digital Torque Tester (Jacobs Chuck) (40 lb-in, 13 mm Chuck)
€ 1.714,00 
   
HTGS-85 Digital Torque Tester - 1000 N-cm, 6.5 mm Jacobs Chuck
€ 1.714,00 
   
HTGS-85L Digital Torque Tester (Jacobs Chuck) (85 lb-in, 13 mm Chuck)
€ 1.819,00 
   
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available , preorder 1-2 weeks , special order, request
Checkline uses cookies for a better shop experience. Don't show this message again.