We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

TI-25MXT Thickness gauge through paint and coating


Made in the USAThe TI-25MXT Wall Thickness Gauge is a compact instrument for determining the wall thickness of materials such as steel and other metals, glass, ceramics, plastics, and many other materials via ultrasound.

Ultrasound measurements are ideal wherever locations are difficult to access or only accessible from one side. This is especially the case in applications for production and industrial plants, where a continuous run of the machines must be guaranteed and a shutdown is associated with high additional costs.

The robust housing of the TI-25MXT wall thickness gauge is made of extruded aluminum. The control panel is sealed and resistant to water and petroleum products, making it ideal for harsh industrial environments and outdoor applications.

Material thickness measurements of coated or painted materials can cause false results unless the device has the ability to "hide" the layer thickness. For this reason, the TI-25MXT is equipped with two easily switchable measurement modes:

*Pulse-Echo mode for uncoated materials:

Measuring range: 0.63 - 914.4 mm (depending on transducer and material). This mode is useful for determining the wall thickness and checking for large areas of flaws.

*Echo-echo mode (multiple echo) for measurements through coating:

Measuring range: 2.54 - 25.4 mm / Maximum coating:1.9 mm. This mode is suitable for measurement by coatings. The layer thickness is automatically determined and hidden by the device so that there is no necessity for conversion calculations - the measured value is directly indicated on the display.

As we trust in the quality and reliability of our equipment, the TI-25MXT Wall Thickness Gauge comes with a warranty of 5-years.


Features
  • Measurements in pulse echo or echo-echo mode
  • Compact measuring device for determining the material thickness while suppressing the layer thickness
  • Illuminated LCD display with status bar for signal quality indication
  • Resolution: 0,01 mm
  • NIST traceable calibration certificate included
  • IP65 protection class
  • 5 years warranty

Typical Applications
Typical Applications

Measuring Limits
Minimum Radius for Convex Surfaces Minimum Radius for Convex Surfaces 8.89 mm
Minimum Radius for Concave Surfaces 76.2 mm
Minimum Radius for Concave Surfaces Minimum Headroom 25.0 mm
Minimum Sample Diameter Minimum Sample Diameter 3.8 mm
Minimum Substrate Thickness - F Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

Additional functions:

Zeroing:
Automatic or manual zeroing of the test head

Probe diameter:
Specify the probe diameter for increased linearity.

High-speed surface scan:
Displays lowest value detected during a 100 Hz scan.

Differential mode:
Displays ± deviation from an entered nominal value.

Alarm Mode:
Adjustable maximum and minimum limits. Limit indicated by a visual and an audible alarm.


Complete Kit

The TI-25MXT comes as a complete set, consisting of:

  • TI-25MXT ultrasonic wall thickness gauge
  • Ultrasonic probe for coated materials
  • 120 ml coupling fluid
  • NIST traceable calibration certificate
  • 2 AA batteries
  • Operation manual


Accessories

A-302-6002 Protection for TI series gauges



More details

A-302-6002 Protection for TI series gauges 127313

Specifications
Total measurement range with standard probe: Pulse-Echo: 1.0 - 199.9 mm (depending ontransducer and material )
Echo-Echo: 2.54 - 25.4 mm
Total measurement range: Pulse Echo: 0.63 - 914.4 mm (depending on material and probe)
Echo Echo: 2.54 - 25.4 mm (through coating)
Maximum layer thickness: 1.9 mm
Resolution: 0.01 mm
Display: -Large LCD display with 4.5 digits each 1.3 cm high -Adjustable backlight
-Division into individual segments clear reproduction of advanced information
Update rate display: 10 Hz
Sound velocity: Adjustable from 305 - 18,542 m / s
Gain: 40-52 dB range in 3dB steps
Time-dependent gain: Usable in P-E and E-E mode depending on probe and frequency
Probe: Usable with 1-10 MHz dual-element probes
Probe cable: Waterproof cable with unpolarized connections, 1.2m length
Power supply: 2x 1.5V alkaline, 1.2V NiCad and 1.5V lithium AA batteries
Housing dimensions: 63.5 x 31.5 x 131.3mm (LxWxH)
Operating temperatur: -30 - 75°C
Warranty: 5 years

Buy Now
Products

Product
Price
Quantity
TI-25MXT Wall Thickness Gauge
€ 1.534,00 
TI-25MXT-WOP Wall Thickness Gauge without Probe
€ 1.378,00 
TI-25DLXT Wall Thickness Gauge Thru Paint With Data Storage
€ 1.707,00 
 
Accessories

Product
Price
Quantity
A-302-6002 - Protective Rubber Boot For TI-Series Small
€ 87,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available , preorder 1-2 weeks , special order, request

Request Information / Quotation




Your callback form is send!


Close



Your message was successfully sent!