The D-2000 Manual Precision Material Thickness Gauge has a stable and rigid base frame with an encapsulated, separate measuring block. And is a top choice if you appreciate high precision (up to 0.001 mm), easy operation, automatic processing and objective, reproducible measurement results.
The device can be adapted to the materials to be measured according to your requirements. Thus, the calliper surfaces, the calliper materials and the measurement
pressures fit in exactly with the guidelines of ISO, EN, DIN or also with your own test regulations.
For textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa and 1 kPa)
For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa)
For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa)
The D-2000 device is also available with different measurement ranges:
Ranges 0 – 10 mm, 0 – 25 mm and 0 – 50 mm
(or with the equivalents in inch, switchable).
With this instrument the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, rubber, plastic films etc.
The D-2000 has data outputs for the digital processing of the measurement results or for the transmission to a printer.
Rigid housing frame
Separate measuring block, encased against outside external impacts, for highest accuracy and repeatability
Switch-selectable measuring units mm / inch
RS 232 data output
Resolution 0.01 mm - standard, 0.001 mm - optional
(0.001 mm is standard for D-2000-P, D-2000-F)
Feeler movement manual by plunger
Includes Calibration Certificate
Optional software for data transfer and analysis - Part No. SW-50