Contact
Phone:
+31 (0)53 8200245
Email :
sales@checkline.eu
The QuintSonic Ultrasonic Coating Thickness Gauge is a portable gauge, especially designed for non-destructive coating thickness measurements of paint, varnish, plastics and other insulation coatings applied on wood, plastics, glass, ceramics etc. as well as for polymer layers on metals. Up to now, these materials could only be measured destructively.
The QuintSonic enables measurement of up to 5 coatings in a single operation
As a special feature, the gauge offers the possibility to measure the total thickness as well as the individual layers of a multi-layer system in only one measuring process. The QuintSonic coating thickness gauge measures single and multi-layers of coatings up to a total thickness of 500 μm. The robust gauge is appropriate for use in the laboratory, in production and on site.
As the first equipment of its sort, the QuintSonic makes it possible to measure coatings on fiber-reinforced plastics, e.g. CFRP, WPC, GFRP.
The intelligent evaluation of the ultrasonic signal reading allows rapid recording of measured values of over 40 measurements per minute.
The QuintSonic Ultrasonic Coating Thickness Gauge is supplied as a complete kit, including:
| No. | Measuring range | Resolution | Accuracy |
|---|---|---|---|
| 1: | 356 µm | 0,25 µm | 0,25 µm |
| 2: | 890 µm | 0,5 µm | 0,5 µm |
| 3: | 1.900 µm | 1 µm | 1 µm |
| 4: | 3.900 µm | 2 µm | 2 µm |
| 5: | 7.500 µm | 4 µm | 4 µm |
| Measuring principle | Ultrasonic pulse run-time method |
| Minimum layer thickness | approx. 10 µm (depending on the ultrasonic velocity in the layer) |
| Number of layers | up to 5 layers in one operation |
| Measurement cycle time | approx. 1 s |
| Memory Capacity | max. 250,000 measuring values in max. 300 batches |
| Statistical evaluation | n, x- , s, kvar, max, min, with time and date of print-out and reading |
| Limit setting | with optical and acoustic warning when limits are exceeded |
| Interfaces | Infrared (IrDA® 1.0), USB (optional RS-232 via additional adapter cable) |
| Power supply | 4 x Mignon battery AA / LR06 |
| Charger | 90 V to 264 V (charging time: 4 hours) |
| Operating temperature | 5 °C - 50 °C |
| Measuring area | 5 mm Ø |
| Contact area | 10 mm Ø |
| Minimum curvature radius | convex:50 mm / concave: - |
| No. of test series | 300 |
| Measurement units | µm, mm, mils |
| International Standards | DIN EN ISO 2808 |
| Signal processing | Sensor integrated digital 32-bit signal processing (SIDSP®) |
| Dimensions and weight | Gauge: 153 mm x 89 mm x 32 mm / 310 gr Probe: Ø25 mm x Ø60 mm / 80 gr. |
