This Adjustable Torque Wrench can be used on places where a socket wrench cannot be used. The specially designed forged steel jaws maintain a constant working length at any opening position of the jaw. Regardless of the hand position the unique power sensor in the handle, accurately detects and analyzes load applied to the grip. The ergonomic grip helps keep the torque point in the center of your hand this assures greater accuracy in torque measurement.
The GEK Series Adjustable Torque Wrenches can measure in Peak mode, Peak with auto zero reset and Real time. 5 programmable torque presets stored in memory enable the user to check frequently used values. The presets alert the user with an pulsing signal at 90% and a continuous signal at 100% of the preset torque value using LED and audible indicators. Presets can be set from 10% of capacity.
3 Models available:
GEK085-W36E: range 2.0 - 85.0 N-m
GEK135-W36E: range 3.1 - 135.0 N-m
GEK200-W36E: range 5.2 - 200.0 N-m
Consistent working length, whether the jaws are open or closed, assures greater accuracy in measurement,
(measured from the bolt's rotational axis to the point where load is applied).
|GEK085-W36E||19.0 - 752.0||1.60 - 62.70||0.21 - 8.66||2.0 - 85.0|
|GEK135-W36E||28 - 1195||2.3 - 99.5||0.32 - 13.76||3.1 - 135.0|
|GEK200-W36E||46 - 1770||3.8 - 147.4||0.55 - 20.40||5.2 - 200.0|
|Accuracy||±1.5% F.S. both CW and CCW directions|
|Adjustable Drive Size||10~36mm|
|Measuring units||Selectable lbf-in, lbf-ft, kgf-m, N-m|
|Data Memory||5 (storable Target torque values), 1 (Pass/Fail Mode)|
|Auto Shut OFF||Power automatically turns off after 2 minutes of non-use|
|Power||Lithium coin battery CR2354|
|Battery Life||Approx. 2 months (100 usages per day)|
|Measuring direction||CW with display facing you, CCW with display facing away from you|
The Digital Adjustable Torque Wrench comes with: