ME102 Mechanical Preselection Meter Counter
Mechanical Preselection Meter Counter with one preset, subtracting mode. Counter available in various models described below.
- For high speeds
- Extremely smooth run
- Ball-bearing drive shaft
- Key preselection
- Key reset - brief reset time
- Small and compact in design
In direction of defined rotation, subtracting. Adding in reverse direction. The counter subtracts from the preset value and activates a changeover contact as soon as zero is reached (or when value changes to 9999)
Approx. 5.5 mm high, white on black background
Projecting on both sides, Ø 4 mm
Push reset key and keep pressed. Key in the desired value in sequence of choice. After preselection, release reset key, thus locking all number keys. No change of the preset value will becaused, even by inadvertently pushing a key.
By pushing the reset key once, the counter returns to its preset value.
Simply stroke the reset lever once to repeat the same counting procedure.
999.9 m (decimal display in red) 9999
When 5 rev.=10 dig: 1000 U/min or 200.0 m/min
When 5 rev.= 1 dig: 10000 U/min or 2000 m/min
When 1 rev.= 1 dig: 6000 U/min or 6000 m/min
Approx. 0.8 Nmm if 1 revolution = 1 digit
Approx. 0.4 Nmm if 50 revolution = 1 digit
Max. 30 W / 100 VA
Max. 220 V, max. 2 A
3-core cable, approx. 30 cm
ME102.020A15D IVO Counter
ME102.020A16D IVO Counter
All mentioned prices are excluding VAT & excluding shipment costs.
, preorder 1-2 weeks , special order, request
If the desired model is not shown in the list of prices, price is on request