Our new DD-300 Durometer range takes rubber / plastic hardness testing to the next level.
This DD-300 hardness tester has been designed to have almost no internal friction and therefore meets the highest quality standards.
The entire internal movement is guided by bearings and makes this one of the best digital durometers available today.
The DD-300 Durometer is available in Shore A, C, D, O, OO, AO, DO and Asker C.
The DD-300 Durometer is supplied with:
|Measuring range||0.5 - 100 units|
|Display||LCD digit 8 mm high|
|Data Output Port||Opto RS232|
|Battery||Re-chargeable 3.6V 1/2AA Size LI-SOCl2|
|Continuous Operating Time Battery||Approx. 18 hours|
|Auto Off||After approx. 1 minute|
|Power Supply||Input - 100-240 VAC|
Output: 5 VDC 650mA
(Height x Width x Depth)
|112 x 64 x 26 mm|
|Weight (net)||250 g|
|Model||ASTM D2240||DIN 53505||ISO 868||ISO 7619|
|A||Flat cone point, 35º Included Angle
Soft rubber, plastics, and elastomers, printer's rolls.
|B||Sharp cone point, 30º Included Angle
Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A.
|C||Flat cone point, 35º Included Angle
Medium hard elastomers and plastics. Also useful to avoid surface marks.
|D||Sharp cone point, 30º Included Angle
Hard rubber and plastics such as thermo plastics, flooring and bowling balls.
Dense granular material, textile windings.
Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A.
Light foams, sponge rubber gels, animal tissue.