Contact
Phone:
+31 (0)53 8200245
Email :
sales@checkline.eu
The PoroTest 7 can be used for non-destructive porosity testing of all insulating coatings on conductive substrates such as steel, aluminium, etc. The test instrument consists of a high voltage probe with an integrated high voltage generator and a test electrode, which is simply connected to the probe. The test voltage control works automatically and is specific to the thickness of the material to be tested and vice versa.
The control unit features a digital display and control pad. The control unit housing is fully portable and made of rugged ABS plastic with an integrated handle. The high voltage probe and control unit are connected via a rugged cable. To detect porosity, the appropriate test voltage specific to the material thickness is set on the control unit which applies, when activated, a spark discharge at the moment a material flaw is detected. In addition to the spark discharge, flaws are indicated by a visible and audible signal and counted. The test voltage is directly indicated on the digital display.
Typical applications: Testing linings and coatings applied on ducts, pipes, hulls, oil and storage tanks, enamel, paint, rubber and bitumen linings, vessels and tanks, GFK and other plastic materials.
3 high voltage probes for different coating thicknesses available (not included):
P7: 0.03 mm – 1.7 mm
P30: 0.52 mm – 9.49 mm
P35: 1.4 mm – 11.3 mm
The PoroTest 7 will be delivered as a complete kit, including:
| Voltage | DC |
| Display | LC-Display, 3-digit |
| Accuracy of voltage setting | ± (0.1 kV + 3% of reading) |
| Dimensions of high voltage probe | 274 mm x 63 mm |
| Dimension of control unit | 225 mm x 150 mm x 85 mm |
| Weight high voltage probe | 550 g |
| Weight control unit | 1400 g |
| Alarm signal | 90 dB, 0.1 s/Pore, continuous tone in case of short-circuit |
| Signal output | potential free, Umax.: 100 V, Imax.: 0.4 A |
| Storage battery | 4 C-cells, IEC LR 14, 3.5 Ah, NiMH, replaceable |
| Storage battery life at maximum voltage | PoroTest 7-P7: 20 hours continious operation PoroTest 7-P30 & P35: 10 hours continious operation |
| Storage battery charging time | 4 hrs quick charge |
| Mains voltage | 110 to 230 V, 50/60 Hz, automatic switch |
| Operating temperature | 0° … +50°C/ 32°…122°F |
| Humidity | avoid dew on the surface (refer to DIN 55 670) |
| Standards | DIN EN ISO 2746, DIN 55 670, ASTM D 5162-01, AS 3894.1-2002 |
