PaintCheck Paint Thickness Gauge
PaintCheck provides fast, non-destructive coating thickness measurements on steel and non-ferrous metals. It is intended for use by car dealerships, auto body shops , insurance adjusters and similar users who only need a simple, one-handed basic gauge. The resolution is limited to 0.5 mils (5 µm) and should not be confused with our other "precision" gauges as this is adequate for basic thickness "checks".
Simply place the gauge on the surface to be tested. An accurate thickness reading appears almost instantaneously on the large, easy-to-read display—without scratching or damaging the surface in any way.
PaintCheck automatically selects the optimum measuring method (magnetic induction or eddy-current) to provide an accurate reading even for the thinnest coatings, on steel as well as on aluminum and other non-ferrous metals. No calibration is required.
In addition, PaintCheck provides valuable information about the coating structure, such as paint top coats or body fillers. For example, if the measured thickness value is significantly greater than the expected paint thickness, this would indicate the use of filler material or repainting.
Speed, accuracy, versatility and ease of use make PaintCheck a valuable tool for a wide range of paint inspection tasks.
- Large measuring range: 0 – 80 mils (0 – 2000 µm)
- Simple, one-key operation
- User-selectable units: mils or µm
- Measures on steel, aluminum and non-ferrous metals
- No calibration required
|| Minimum Radius for Convex Surfaces||Fe - 1.5" (37 mm)|
NFe- 3.0" (75mm)
| Minimum Radius for Concave Surfaces||4” (100mm)|
|Minimum Headroom||5" (125mm)|
|Minimum Sample Diameter||1.6" (40mm)|
|Minimum Substrate Thickness - F||30 mils (0.75mm)|
|Minimum Substrate Thickness - NFe||10 mils (0.25mm)|
Fe: 0 – 80.00 mils (0 – 2000 µm)
NFe: 0 – 80.00 mils (0 – 2000 µm)
±0.5 mils plus 5% of reading
±5 µm plus 5% of reading
4-digit alphanumeric, 0.4” (10mm) height
Minimum Measuring Area
1.6" x 1.6" (40mm x 40mm)
Minimum Substrate Thickness
Fe: 30 mils (0.75mm)
NFe: 10 mils (0.25mm)
32 °F to 122 °F (0 °C to 50 °C )
5 °F to 140 °F (–15 °C to 60 °C )
4.3" x 2" x 1" (110 x 50 x 25mm)
IP 52 (proof against dust and dripping water)
DIN, ISO, ASTM, BS
PaintCheck gauges are supplied as a complete
kit, with gauge, plastic test shim, steel zero test
plate, aluminum zero test plate, 2x AAA batteries,
manual and soft carrying pouch.
Cic-Coating Calibration Coating Thickness Gauge
- Easy planning of calibration
- Short turnaround
- Possibility to adjust and repair
- In accordance with DIN EN ISO 2178, 2360, 2808 and meets or exceeds the indicated accuracy.
PaintCheck Coating Thickness Gauge
All mentioned prices are excluding VAT & excluding shipment costs.
, preorder 1-2 weeks , special order, request