View Larger Image
|
|
TI-MVX
Ultrasonic Thickness Gauge with Enhanced Display and adjustable gain |
The CHECKLINE model TI-MVX provides the user with many advanced features like A-Scan, B-Scan as well as a complete alphanumeric system for datalogging which can store thousands of data values and A-scan captures.
The TI-MVX is easy to use and has the highest resolution graphic LCD available on the market. The gauge including accessories is supplied as a complete kit in a carrying case with FREE software, NIST-Traceable Calibration Certificate and transfer cable.
Try the TI-MVX yourself!
Click here for our TI-MVX Demo
|
 The MVX is equipped with multiple viewing
options to provide users with a complete set
inspection tools: (RF waveform, +/-
Rectified
waveform, Time based B-Scan, and Large Digits). | | Built in hardware AGC gain control for through
paint measurements in multi mode operation. | | The MVX has the ability to store 64 custom
user defined setups. All factory setups can
be selected, edited and saved to any setup
location. | | Use the visual alarm to set hi and lo limits for
applications requiring specific tolerances.
If the actual thickness value is above or below
the limits, a red light is illuminated. | | Includes NIST Calibration Certificate | | CE Certified |
| | The A-Scan rectified mode is commonly used
for detecting flaws/pits in pulse-echo mode
and measuring through paint and coatings in
echo-echo mode. | | The time-based B-Scan feature of the MVX
displays a cross section of the test material.
It is commonly used to display the profile of
the bottom surface of the test material. | | The high speed scan feature speeds up the
inspection process by making 32 measurements
per second. Remove transducer from
the test material, and display the minimum
measurement scanned. | | Use the find feature to locate the detection
point, while automatically adjusting the display
to bring the signal into view. | | MVX also comes complete with our Windows®
PC software for transferring data to and
from a PC. | | Includes Flaw Inspection - Prove Up Mode, (special probe required) |
|
| The TI-MVX is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| TI-V-BLOCK | The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only. |  | | | Click image for more details
|
| CF-AN | Used to create an ultrasonic coupling between the probe and material to be measured 200 ml (7oz) bottle |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| DataComm | |  | | | Click image for more details
|
|
|
A-Scan Scan Mode |
B-Scan Mode |
 |
 |
| The A-Scan rectified mode is the preferred
display view for flaw and pit detection applications
and measuring through paint and coatings in the
echo-echo mode. |
The B-Scan view displays a time-based cross
section of the test material. It is commonly used to
display the profile of the blind or underside of a pipe
or tank. |
|
Large Digits |
 |
The Large Digits view provides a
basic digital thickness gauge look and feel. The large
display makes it easy for the operator to monitor the thickness readings. |
|
| Range: |
Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches)
Range will vary +/- depending on the thickness of the coating.
Range varies by transducer, multiple transducers are required to cover entire range. |
| Resolution: |
0.01mm (.001 inches) |
| Velocity Range: |
.0492 to .3936 in./ms
1250 to 9999 meters/sec |
| Units: |
English & Metric |
| Measurement Modes: |
- Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint) |
| Transducer Types: |
Dual Element (1 to 10 MHz). |
| Memory: |
16 megabit non-volatile ram |
| Memory capacity: |
12.000 pages with 1 reading and waveform per page |
| Power Source: |
Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: |
Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off: |
if idle 5 min |
| Display: |
1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard: |
Membrane switch with twelve tactile keys |
| Case: |
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature: |
-10° to 60°C (-14° to 140°F) |
| Weigth, net: |
383 grams |
| Dimensions: |
63.5 W x 165 H x 31.5 D mm |
| Certification: |
CE Approved, Factory calibration traceable to NIST standards |
| Warranty: |
2 year limited |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-MVX | €1705.00 | TI-MVX Complete kit WITHOUT PROBE | | |
| Accessories |
| T-104-0600 | €300.00 | Probe 1MHz | | |
| CF-AN | €9.00 | Coupling Fluid - 200ml | | |
| TICC-MVX | €65.00 | Protective holder for MVX | | |
| Calibration Certificate | €99.00 | Calibration Inspection Certificate | | |
| TI-PRINTER | €330.00 | Printer for Wall Thickness Gauge | | |
| V-Block | €150.00 | V-Block Transducer Holder | | |
| RS232-2-USB | €300.00 | Serial (RS232) to USB Adapter | | |
| N-306-0010 | €110.00 | Data Cable 182cm | | |
| TI-SB4 | €115.00 | Uncertified Steel Testblock | | |
| TI-SB-4H | €300.00 | Steel Test Block | | |
| TI-SB-4L | €255.00 | Steel Test Block | | |
| TI-SB-5L | €385.00 | Certified Steel Test Step Block | | |
| T-102-2700 | €285.00 | 5 MHz MMX Probe 1/4" | | |
| T-104-0000 | €250.00 | 1/2" dia 1.0 MHz transducer for composites, thick plastics, rubber | | |
| T-104-1000 | €255.00 | 1/2" dia. 2.25 MHz transducer for plastics, cast iron | | |
| T-044-2000 | €320.00 | High Temperature Probe 1/2" 5 MHz | | |
| T-101-2000 | €245.00 | 3/16" dia. 5.0 MHz transducer | | |
| T-102-1000 | €245.00 | 1/4" dia 2.25 MHz transducer | | | | |
All mentioned prices are excluding VAT |
|
Downloads
