View Larger Image
|
|
TI-007
Precision Ultrasonic Wall Thickness Gauge |
Measuring Range
0.15 - 25.4 mm
0.0060 - 1.000 inches
With the TI-007 wall thickness gauge you can perform extremely precise and high-resolution measurements on thin-walled metal and plastics. This ultrasonic device is very suitable for use in extreme environments because of it’s robust aluminium housing which is sealed for excellent protection.
The TI-007 ultrasonic wall thickness gauge has a MEASURING RANGE from 0.15 to 25.4 mm (0.0060 to 1.0000 inch). It can measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics when using a single element delay tip transducer.
A special model with a Graphite Tip probe for measurement of plastics is also available (TI-007-GT).
|
 Large, backlit LCD display retains last reading | | Resolution of 0.001 mm (0.0001 inch) | | RS-232 Data output of individual values for connection to data collection or quality control systems | | Selectable units of inch or mm |
| | Includes NIST Calibration Certificate | | CE Certified | | Optional model available with Graphite Tip for measuring plastics: TI-007-GT |
|
|
Single-Element Contact type probe can be fitted with a varierety of delay line tips, depending upon the application
Standard, small for very thin materialsStandard, tall for thicker materialsConical, when smallest contact area is requiredGraphite for plastics |
| TI-SB | Precision Machined and Finished Includes NIST Report and Test Data |  | | | Click image for more details
|
| TI-SB4 | Uncertified Steel Test Block For convenient confirmation of thickness gauge calibration |  | | | Click image for more details
|
| TICC-M | Constructed from heavy duty Cordura Nylon Belt loop included Includes wrist & shoulder straps |  | | | Click image for more details
|
| TI-DIN-CAL | Calibration Certificate DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1 |  | | | Click image for more details
|
| TI-PRINTER | Small, portable and easy to use Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output |  | | | Click image for more details
|
| N-306-0010 | RS232 (DB-9 to Lemo) Data Cable 182cm |  | | | Click image for more details
|
| T-402-5507 | Spare / Replacement 15 MHz Probe for TI-007 |  | | | Click image for more details
|
| Delay Line Tips | Delay Line Tips for TI-007 |  | | | Click image for more details
|
| CF12 | Used to create an ultrasonic coupling between the probe and material to be measured 355ml (12oz) bottle |  | | | Click image for more details
|
|
 |
| The TI-007 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. |  |
| P/N |
Description |
Standard / Optional |
Image |
| X-231-0000 |
1/4" x 3/8"
for all metals
(Short) |
Standard |
 |
| X-241-0000 |
1/4" x 1/2"
for all metals
(Long) |
Standard |
 |
| X-633-0000 |
1/4" x 3/8"
Graphite Tip
for thin plastics |
Standard on "-GT" models |
 |
| X-532-0000 |
3/16" x 3/8"
Conical Tip
for all metals |
Optional |
 |
| X-533-0000 |
3/16" x 3/8"
Graphite Tip
for thin plastics
(Graphite Cone) |
Optional |
 |
|
| Range in Steel |
0.15-25.4 mm (0.0060-1.0000" ) |
| Resolution |
.0001" (0.001 mm) |
| Display |
4½ - Digit, 0.5" Backlit LCD |
| Velocity Range |
2000-10.000 m/sec. (6.500-33.000 ft./sec ) |
| Transducer |
Single element with delay tip. 10 to 22 MHz frequency range. |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 30 m (100 ft ) |
| Outputs |
RS-232, single value when send key is pressed |
| Temp. Limits |
Ambient: -30 to 50° C ( -20 to 120° F)
Material: -20 to 100° C (0 to 200° F) |
| Battery Type |
Two AA batteries |
| Battery Life |
150 hours |
| Weight |
285 gr |
| Size |
64 x 114 x 32 mm
(2.5 x 4.5 x 1.25") |
| Warranty |
Gauge: 5 Years
Probes: 90 Days |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TI-007 | €1425.00 | TI-007 Complete kit | | |
| TI-007-GT | €1465.00 | TI-007-GT Complete kit with Graphite Tip | | |
| Accessories |
| CF-AN | €9.00 | Coupling Fluid - 200ml | | |
| TICC-M | €50.00 | Protective holder | | |
| Calibration Certificate | €99.00 | Calibration Inspection Certificate | | |
| TI-PRINTER | €330.00 | Printer for Wall Thickness Gauge | | |
| N-306-0010 | €110.00 | Data Cable 182cm | | |
| TI-SB4 | €115.00 | Uncertified Steel Testblock | | |
| TI-SB-4H | €329.00 | Steel Test Block | | |
| TI-SB-4L | €300.00 | Steel Test Block | | |
| TI-SB-5L | €255.00 | Certified Steel Test Step Block | | |
| T-402-5507 | €435.00 | Delay Line Probe 15 MHz | | |
| X-231-0000 | €25.00 | Tip for TI-007 Standard Small | | |
| X-241-0000 | €25.00 | Tip for TI-007 Standard Long | | |
| X-633-0000 | €35.00 | Graphite Tip for TI-007 | | |
| X-532-0000 | €25.00 | Cone Tip for TI-007 Probe | | |
| X-132-0000 | €25.00 | Tip for TI-007 Small Cone | | |
| X-533-0000 | €50.00 | Graphite Cone Tip Delay Line Probe | | | | |
All mentioned prices are excluding VAT |
|
Downloads
