View Larger Image
|
|
TSTM-DC
Advanced Motorized Vertical Torque Test Stand |
The TSTM-DC Advanced Motorized Torque Test Stand offers all the mechanical specifications of the TSTM motorized test stand, including 100 lbin (11.3 Nm) torque capacity, versatile modular design, quick engagement and disengagement of samples, fixture mounting plate, lever-operated slider with travel stops and more.
The TSTM-DC offers expanded capabilities, including full PC control, programmable angle limits, programmable cycling, auto return, and other features.
|
 Angle dial with 2° resolution | | The TSTM-DC is supplied with a wrench set | | No speed variation with load |
| | CE Mark | | Digital display of angle | | Programmable angle limits |
|
BGI
Remote Sensor Force / Torque Gauge |  |
 Fully interchangeable force and torque BGI Force/Torque Sensors
Unlimited number of sensors possible due to unique design RS-232, Mitutoyo and analog outputs
| | | Click image for more info
|
- Computer Control
A bi-directional RS-232 port is provided to interface with a PC. For full control from a PC a command set is provided.
The following additional items are required for PC control:
- Model BGI force/torque gauge (more info)
- 09-1056 serial cable
- 09-1143 multi-function cable
- Digital Angle Indication
Rotational travel is indicated in degrees or revolutions, with RS-232 output of angle data.
- Programmable Angle Limits
The TSTM-DC can stop at or cycle between programmable upper and lower angle limits. Programmable in degrees or revolutions.
- Overload Protection
Protects the torque sensor against overload (requires a Model BGI force/torque gauge and 09-1143 multi-function cable). The desired percentage of full scale of the sensor can be user-programmed.
- Auto-return
The torque table rotates to an angle limit or torque set point (requires a Model BGI force/torque gauge and 09-1143 cable), stops, and reverses direction at full speed to the other angle limit or torque set point.
- Cycling / Dwell Time
Same as Auto-return, but with the ability to program the number of cycles up to 99,999 cycles. Dwell time allows the operator to program the length of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the torque table pauses between cycles. Independent CW and CCW speeds may be programmed.
- Programmable Button Functions
Expands CW and CCW button operation to three user-configurable modes:
1. Maintained (standard): short push produces continuous motion until STOP is pressed
2. Momentary: torque table rotates only while the button is pressed
3. Auto: short push produces maintained motion, while holding the button down will produce momentary motion
- Independent CW and CCW Speeds
Configurable speeds for CW and CCW directions.
- Selectable speed units of measurement (RPM and °/s)
- Password protection
Prevents unauthorized changes to test parameters.
|
| Maximum load |
100 lbin (11.3 Nm) |
| Speed range |
0.01 - 15 RPM (0.05 - 90°/s) |
| Speed accuracy |
±0.2% of setting, ±0% variation with load |
| Throat |
4.10" (104 mm) |
| Manual adjustment |
12°/knob rev |
| Maximum slider travel |
15.5" (394 mm) |
| Slider travel rate |
.047" (26.6 mm) / lever rev |
| Line voltage |
80-240 VAC 50/60 Hz |
| Rotational travel accuracy |
±0.7° / 0.002 rev. |
| Rotational travel repeatability |
0.1° / 0.01 rev. |
| Rotational travel resolution |
0.1° / 0.01 rev. |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TSTM-DC |
€6285.00 |
Motorized Vertical Torque Test Stand | | | | |
All mentioned prices are excluding VAT |
|
