View Larger Image
|
|
BLRTSX
Brushless Rotary Torque Transducer |
For use with most hand tools, power tools or rotational measurement applications.
Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener.
The common "brush bounce" that plagues the accuracy testing of pulse tools is cured when using a brushless rotary transducer.
Features an instant auto-recognition system of the BLRTSX connected to the PTT. |
 Accuracy +/-.25% of full scale. | | Use with most hand tools, power tools or rotational measurement applications. | | The common "brush bounce" that plagues the accuracy testing of pulse tools is cured when using a brushless rotary transducer. |
| | Connects between the power tool and the joint. Monitors actual torque being applied from the driver to the fastener. | | Bi-directional |
|
| Model |
Range |
| BLRTSX28z-H | 10 - 28 Oz-in |
| BLRTSX70z-H | 10 -70 Oz-in |
| BLRTSX140z-H | 25 - 140 Oz-in |
| BLRTSX18i-H | 2 - 8 Lb-in |
| BLRTSX50i-H | 5 - 50 Lb-in |
| BLRTSX50i | 5 - 50 Lb-in |
| BLRTSX100i-H | 10 - 100 Lb-in |
| BLRTSX100i | 10 - 100 Lb-in |
| BLRTSX160i-H | 16 - 160 Lb-in |
| BLRTSX160i | 16 - 160 Lb-in |
| BLRTSX18F | 2 - 18 Lb-ft |
| BLRTSX36F | 4 - 36 Lb-ft |
| BLRTSX73F | 8 - 73 Lb-ft |
| BLRTSX118F | 12 - 118 Lb-ft |
| BLRTSX184F | 19 - 184 Lb-ft |
| BLRTSX368F | 37 - 368 Lb-ft |
| BLRTSX738F | 74 - 738 Lb-ft |
| |
Alternative Unit Calculator- recasts values in above table
(units in RED can be selected on gauge. Other units for reference only)
|
LTT
Torque and Angle Analyzer with USB Output |  |
 Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
Provides “EZ-Plug & Play.” Features an instant auto-recognition system of the transducer connected to the LTT. | | | Click image for more info
|
PTT
Torque Analyzer |  |
System Accuracy +/- 0.5% of reading from 20% to 100% of full scale Selection of six operating modes: Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test. | | | Click image for more info
|
| Output at Rated Capacity |
> 6 Nm [53 lbf.in] rated torque 2 mV/V |
| Interchangeability |
Matched for mv/v and shunt calibration +0.3% FS |
| Nonlinearity |
+0.2% FS |
| Excitation Recommended |
10V DC or AC RMS |
| Bridge Resistance |
350 ohms |
| Usable Temperature Range |
41-122 degrees F |
| Safe Overload |
125% of rated output |
|
|
