Model G1001
Wire Terminal Grip
Pull testing of wire and tube terminals/crimps, and other slender samples
Capacity: 1000 N (200 lb)
Price € 195.00
Model G1002
Dual Roller Cam Grips
Pull testing of wires, tubes, and other slender samples
Capacity: 1000 N (200 lb)
Price € 150.00
Model G1003
Mini Component Grips
For a variety of pull-off tests
Capacity: 150 N (30 lb)
Price € 120.00
Model G1008
Film & Paper Grips
Tensile testing of film, paper, and other thin materials (1 inch wide)
Capacity: 500 N (100 lb)
Price € 210.00
Model G1015
Film & Paper Grips
Tensile testing of film, paper, and other thin materials (3-7 inch wide)
Capacity: 500 N (100 lb)
Price €260.00 up to €295.00
Model G1013
Parallel Jaw Grips
General tensile testing
Capacity: 1000 N (200 lb)
Price € 160.00
Model G1061
Wedge Grip
General tensile testing
5.3 kN (1200 lb)
Price €375.00 up to €460.00
Model G1010
Jacobs Chuck Grip (Force)
Secures a fixture or sample during tensile testing
Capacity: 150 N (30 lb)
Price € 85.00
Model G1056
Multi-jaw Grip
Capacity 100 lb
For gripping round and irregularly shaped items
Price € 250.00
Model GT-30-M10
Vice Chuck
Capacity 220 lb
Price € 250.00
Model G1009
Compression Plates
Compresses samples during testing
Capacity: 1000 N (200 lb) / 2500 N (500 lb)
Price €35.00 up to €65.00
Model G1019-G1020-G1021
Padded Attachments
Padded attachments for ergonomics analysis and job task analysis
Capacity: 2500 N (500 lb)
Price €35.00 up to €70.00
Model G1011
Rubber Tip
Simulates a human finger in compression testing
Capacity: 250 N (50 lb)
Price € 25.00
Model G1018
Swivel Adapters
Swiveling adapter, for use between gripping fixtures
Capacity: 1000 N (200 lb) / 2500 N (500 lb)
Price € 55.00
Model G Series Thread Adapters
Thread Adapters & Couplings
Adapters, Male - Female, Male - Male, different threads available
Capacity: 500 N / 1000 N / 2500 N / 5000 N
Price € 90.00
Model G1016-G1017
Series STH Attachments
Secures fixtures, bits, or samples during torque testing
100 lbin capacity
Model G1029-G1036
Flat Head
Flat Heads, available in 2 different threads
Capacity: 1000 N (200lb) / 2500 N (500lb)
Price €15.00 up to €20.00
Model G1023
Bottle Grip
Torque and top-load testing of closures, bottles
Capacity: 11.3 Nm (100 lbin)
Model G1024-G1031
Extension Rods
Extension Rods, different threads and lengths available
Capacity: 1000 N (200lb) / 2500 N (500lb)
Price €15.00 up to €20.00
Model G1025-G1032
Chisels
Chisels, available in 2 different threads
Capacity: 1000 N (200lb) / 2500 N (500lb)
Price €15.00 up to €20.00
Model G1027-G1034
V-Grooves
V-Grooves, available in 2 different threads
Capacity: 1000 N (200 lb) / 2500 N (500 lb)
Price €15.00 up to €20.00
Model G1022
Jacobs Chuck Grips For TSTM
Secures a fixture or sample during torque testing
100 lbin capacity
Model G1028-G1038-G1035-G1042
Hooks
Hooks, different sizes and threads available
Capacity: 1000 N (200 lb) / 2500 N (500 lb)
Price €15.00 up to €25.00
Model G1026-G1033
Cones
Cones, available in 2 different threads
Capacity: 1000 N (200 lb) / 2500 N (500 lb)
Price €15.00 up to €20.00
Model G1046
Pneumatic Film & Paper Grip
Tensile testing of film, paper, and other thin materials
100 lb capacity
Price € 510.00
Model G1045
Typical applications include the testing of adhesives, films, and packaging, such as foil seals found on yogurt containers, juice containers, and others.
Maintains 90° angle between the table and the direction of pull
Maximum table travel: 8.2 in (210 mm)
Price € 1015.00
Model G1053
Cap Grip
Secures bottle caps during torque testing
100 lbin capacity
Model G1062
Miniature Wedge Grip
100 lb [500 N] capacity
Model Force Gauge handle Grips
Model 09-1090
Set Point Cable
Stops / reverses motorized test stand at load set points
Sends a set point signal to an external device
Model 11-1022
Hi / lo limits indicator
Indicates pass or fail condition during a test
Compatible with force gauges and torque gauges with set point outputs
Model 11-1042
Overload protection module
Protects force gauges and torque gauges against overload
For use with motorized test stands
Model BP-6
Button Puller
Capacity 30lbs
Model AC1029
Axial Displacement Compensator
Model ES001
Model ES002
Model GP-15
General Purpose Grip
For film, paper, labels, packaging, and other thin materials for tensile and peel testing
Max Sample Thickness: 4mm / 0.16"
Model FG-GRM6FLM12
Film Style Grip
Capacity 50 Kg
Product Info
Buy Now
