header
  ⇒ GI355 - GI356
   Home | About us | Contact Us | Search 
 Product Selector 
  GI355 - GI356
View Larger Image



Features
Output signals
Dimensions
Product Configurations
Specifications
Model selector
Buy Now

  
GI355 - GI356
Incremental Encoder

Resolution up to 6000 pulses

 Features
 Standard encoder with 58 mm dia.
 Resolution up to 6000 pulses/revolution
 Speed up to 10000 rpm
 Signal outputs A, A inv., B, B inv., N, N inv.
 Temperature range at 5 VDC up to 100 °C


 Output signals

Signals with clockwise rotation when looking at the flange.
Line driver (5 VDC)
Level high > 2.5 V (with I = -20 mA)
Level low < 0.5 V (with I = 20 mA)
Loading high < 20 mA
Loading high < 20 mA

Push-pull output (10...30 VDC)
Level high > UB -3 V (with I = -20 mA)
Level low < 1.5 V (with I = 20 mA)
Loading high < 40 mA
Loading high < 40 mA

Push-pull output (4,75...30 VDC)
Level high > UB -3 V (with I = -20 mA)
Level low < 0.5 V (with I = 20 mA)
Loading high < 20 mA
Loading high < 20 mA



 Dimensions
Dimensions


 Product Configurations

PlugCable ColorAssignment
Pin 1pinkTrack B inv.
Pin 2blueUB Sense
Pin 3redTrack N (zero pulses)
Pin 4blackTr. N inv. (zero pulses inv.)
Pin 5brownTrack A
Pin 6greenTrack A inv.
Pin 7--
Pin 8grayTrack B
Pin 9--
Pin 10white/greenGND
Pin 11whiteGND Sense
Pin 12brown/greenUB

UB Sense and GND Sense are directly connected to UB and GND respectively. Recommendation: Please use leads twisted in pairs (e.g. A/A inv.) for cable lengths of 10 m or more.






Accessories
Order No.
Z 119.006 Eccentric mounting
Z 119.013 Adapter plate for clamping flange
Z 119.015 Mounting bell for servo flange
Z 119.017 Angular mounting for clamping flange
Z 119.025 Adapter plate for clamping flange
Z 119.033 Adapter plate, ø65 mm for clamping flange
Z 119.035 Bearing flange for servo flange

Extension cord with connector on one end
Z 141.001 Connector without cable
Z 141.003 Connector with 2 m cable
Z 141.005 Connector with 5 m cable
Z 141.007 Connector with 10 m cable


 Specifications
Operating voltage 5 VDC ±10 %
10...30 VDC
4.75...30 VDC
with reverse voltage protection
Current consumption Max. 30 mA (w/o load), at 24 VDC
Max. 60 mA (w/o load), at 5 VDC
Limit frequency 150 kHz
Output signals Channel A, B, N + inverted
Output stages
5 VDC Line driver to RS422
10...30 VDC Push-pull output, short-circuitproof or line driver to RS422
4.75...30 VDC Push-pull outp., short-circuit-proof
Speed Max. 10000 rpm
Start-up torque
without sealing (IP54) < 0.010 Nm
with sealing (IP65) < 0.015 Nm
Shaft loading
axial < 20 N
radial < 40 N
Moment of inertia 1.45 x 10-6 kgm2
Housing material Aluminium
Weight Approx. 250 g
Operating temperature -20...+100 °C at 5 VDC
-20...+85 °C at 10...30 VDC
-20...+85 °C at 4.75...30 VDC
Protection type
Shaft without sealing IP 54
Shaft with sealing IP 65
Humidity Max. relative humidity 95 %, non-condensing
Resistance
Vibration DIN EN 60068-2-6
<100 m/s2, 16-2000 Hz
Shock DIN EN 60068-2-27
<1000 m/s2, 4 ms
Interference resistance DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4


 Model Selector


  1:Servo flange/10 mm IP 54 (Type GI 356)
  A:Clamping flange/10 mm IP 65 (Type GI 355)
  B:Servo flange/10 mm IP 65 (Type GI 356)
  22:5 VDC/Line driver RS422
  60:10...30 VDC/Push-pull + inv. Note: This model is completely replaced by model 70
  62:10...30 VDC/Line driver RS422
  70:4.75...30 VDC/Push-pull + inv.
  31:Cable 1 m (10...30 VDC / 4.75...30 VDC) axial
  41:Cable 1 m (10...30 VDC / 4.75...30 VDC) radial
  51:Cable 1 m (5 VDC) axial
  61:Cable 1 m (5 VDC) radial
  C2:C housing plug, 12-pin, axial
  C3:C housing plug, 12-pin, radial
  06:200 Pulses
  09:250 Pulses
  13:360 Pulses
  14:400 Pulses
  15:500 Pulses
  22:1000 Pulses
  23:1024 Pulses
  24:1250 Pulses
  26:1500 Pulses
  28:2000 Pulses
  30:2500 Pulses
  31:3600 Pulses
  35:5000 Pulses
  36:10 Pulses
  39:50 Pulses
  40:60 Pulses
  41:100 Pulses
  48:6000 Pulses
  49:5 Pulses
  50:25 Pulses
  57:128 Pulses
GI35x.  Clamping flange

Your selection: GI35x.



 Buy Now

 item Price Description In Cart     Shopping cart
Product(s)   
 GI355.A704113€255.00GI355.A70.4113 IVO Incremental Encoder
Add
 GI355.A704115€255.00GI355.0704115 IVO Incremental Encoder
Add
 GI355.A704122€255.00GI355.0704122 IVO Incremental Encoder
Add
 GI355.A704123€255.00GI355.0704123 IVO Incremental Encoder
Add
 GI355.A704139€255.00GI355.0704139 IVO Incremental Encoder
Add
 GI355.A704141€255.00GI355.0704141 IVO Incremental Encoder
Add
 GI355.A70C313€205.00GI355.070C313 IVO Incremental Encoder
Add
 GI355.A70C315€205.00GI355.070C315 IVO Incremental Encoder
Add
 GI355.A70C322€205.00GI355.070C322 IVO Incremental Encoder
Add
 GI355.A70C323€205.00GI355.070C323 IVO Incremental Encoder
Add
 GI355.A70C339€205.00GI355.070C339 IVO Incremental Encoder
Add
 GI355.A70C341€205.00GI355.070C341 IVO Incremental Encoder
Add
 GI356.A70C313€255.00GI356.070C313 IVO Incremental Encoder
Add
 GI356.A70C315€255.00GI356.070C315 IVO Incremental Encoder
Add
 GI356.A70C322€255.00GI356.070C322 IVO Incremental Encoder
Add
 GI356.A70C323€255.00GI356.070C323 IVO Incremental Encoder
Add
 GI356.A70C339€255.00GI356.070C339 IVO Incremental Encoder
Add
 GI356.A70C341€255.00GI356.070C341 IVO Incremental Encoder
Add
 GI356.B70C322€255.00GI356.B70C322 IVO Incremental Encoder
Add
 

All mentioned prices are excluding VAT

 Checkline Europe Dennenweg 225B, 7545WE Enschede - Netherlands TEL: +31 (0)88 0029000   FAX: +31 (0)88 0029009   KvK nr. 08143059
 [Bolt Tension Meter]   [Cable Tension Meter]   [Cap Torque Tester]   [Coating Thickness Gauge]   [Coating & Paint Adhesion Tester]   [Dew Point Meter]   [Durometer]   [Durometer Test Stand]   [Dynamometer]   [Ergnonomics Testing]   [Flaw Detector]   [Force Gauge - Digital]   [Force Gauge - Mechanical]   [Force Grips & Accessories]   [Force Sensor]   [Force Test Stand]   [Intrinsically Safe Gauge]   [IVO Counters & Indicators]   [Laser Distance Meter]   [Leica Construction Laser]   [Merlin Glass Analysis Meter]   [Metal Hardness Tester]   [Moisture Meter]   [Mountz Torque Testers]   [Porosity Detectors]   [Raytek IR Thermometer]   [Roughness Testers]   [Software]   [Sonic Tester]   [Stroboscope]   [Tachometer]   [Tension Meter]   [Textile Test Instruments]   [Thickness Gauge]   [Torque Calibration Tester]   [Torque Gauge]   [Torque Grips & Accessories]   [Torque Test Stand]   [Torque Sensor]   [Torque Screwdrivers]   [Torque Wrench]   [Tramex Moisture Meters]   [Vibration Meter]   [Wall Thickness Gauge]   [Wire Terminal Tester] 
Page executed in 1.6096 seconds