View Larger Image
|
|
MX-500
Motorized Vertical Test Stand |
MX-500 motorized test stands offer advanced force testing. The combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.
Speed control, quick return and emergency stop are standard features.
*FORCE GAUGE IS NOT INCLUDED
Designed to work with the Z2 & ZP force gauges. |
 One stand for both compression (push) and tension (pull) tests | | Stroke: 13" | | Jog, Single Cycle, Continuous Cycle (72 hour max.), Force Control |
| | Maximum load 500 lb | | Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range. | | Wide speed range: 0.2 – 7 in/min (optional speed ranges available) |
|
ZP
Digital Force Gauge with USB Output |  |
 Overload protection 200 % full scale
For hand-held use or mounting on test stands USB, RS-232C, and Analog outputs | | | Click image for more info
|
Z2
Digital Force Gauge |  |
Output signals
(RS 232 C, analog and Mitutoyo Digimatic) | | | Click image for more info
|
SW-1
Data Acquisition Software for Force Gauges & Torque Gauges |  |
Full SPC and graphing capabilities Automates your data collection Provides a running log of all measurements along with a chart of the data as well as statistical information | | | Click image for more info
|
DB
Data Input Button |  |
Send data to the PC spread sheet with the touch of a button Zero the gauge Select different acquisition rates | | | Click image for more info
|
LP-99
Lexan Safety Shield |  |
Helps protect personnel from injury by containing debris during testing | | | Click image for more info
|
| Capacity |
500 lbs |
| Stroke |
13" |
| Travel Rate |
0.2 - 7 in/min |
| Dimensions |
Refer to dimensions above |
| Compatible Gauges |
DS2, Z2, ZP, ZPH and DPSH |
| Warranty |
2 years |
| *Note |
Optional Distance Meter Max Sampling Rate Output - 2 Samples Per Second |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| MX-500 | €4240.00 | Motorized Test Stand | | | | |
All mentioned prices are excluding VAT |
|
