View Larger Image
|
|
TA202
Tachometer with calculation functions and 2 Limits |
High quality tachometers by IVO, available in many different types shown below. The TA202 is equipped with a mounting plate to install the tachometer in many applications.
Two limits that can be deliberately defined under “P1” and “P2”, allow to monitor production processes.
Two tachometers allow to capture and display, for example, the rotational speed and speed at “F1” and “F2” as well as to use a calculation function programmed by the user that can be selected via “F3” and displayed. It is possible to display ratio, difference, stretching / shrinking, run time, time measurement with start and stop signal, length of period, pulse duration or measurement of pulse rate via the calculation functions.
The TA202 is also equipped with an electronic trailing needle to be assigned by the operator to “F1”, “F2” or “F3”. This maximum memorized value can be selected via “SZ” and thus displayed. |
 Tachometer with 2 adjustable limits | | Sensor logic can be programmed | | Pulse valuation can be programmed
from 0.0001 to 9999.99 | | Frequencies processed up to 40 kHz |
| | Precise measurement due to phase evaluation | | Measurement according to measurement of lenght of period | | Interface RS485, RS422, RS232, Analog output |
|
Pin assignment
 |
| Electrical data |
|
| Supply voltage: |
Choice of two voltages via switch on device.
Always set to higher voltage when supplied.
115 ±10% / 230 VAC ±10% (50 / 60 Hz)
24 / 48 VAC ±10% (50 / 60 Hz)
24 VDC ±10%, 5% RW |
| Power consumption: |
7 VA, 5 W |
| Sensor supply: |
12...26 VDC / max. 100 mA |
| Signal inputs: |
Comparator inputs
PNP, NPN, Sinus or NAMUR without explosion protection
Voltage level 4...40 V
Input resistance 3 kOhm |
| Input frequency: |
F1 / F2, 10 kHz / 40 kHz or 25 Hz |
| Control inputs: |
Control inputs for Start, Stop |
| Electr. signal outputs: |
Optocoupler
Max. switching voltage +40 V
Max. switching current 15 mA
Residual voltage ¡Ü 1 V |
| Relay signal outputs: |
2 floating center-zero relays
Internal spark suppression
Max. switch. voltage 250 VAC/110 VDC
Max. switch. current 1 A under ohmic load
Switching capacity 150 VA / 30 W |
| Analog output: |
0(2)...10 V, 0(4)...20 mA
Free assignment to F1, F2 or F3
Offset as well as lower and upper analog limit can be programmed |
| Data back-up: |
> 10 years via EEPROM |
Mechanical data |
|
| Display: |
7-segment LED-display
6-digit display of real values, 14 mm high
Decimal point can be programmed
Suppression of leading zero |
| Operation, keypad: |
Front membrane with short-stroke keys |
| Front dimensions: |
DIN housing 96 x 48 mm |
| Mounting: |
Front-plate installation |
| Fastening: |
By means of clamping frame |
| Weight: |
Version AC: approx. 350 g
Version DC: approx. 250 g |
| Connection: |
Plug-in screw terminals
Grid 5.08 mm / 3.81 mm |
| Core cross-section: |
Max. 1.5 mm2 |
| Housing material: |
Polycarbonate black, UL 94V-0 |
| Front membrane: |
Polyester |
Ambient conditions |
|
| Ambient temperature: |
0...+50 °C |
| Storage temperature: |
-20...+70 °C |
| Relative humidity: |
Max. relative humidity 80 %, at 25 °C, non condensing |
| Protection: |
Front IP 65 to DIN 40050 |
| General rating: |
EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2 |
| Interference immunity: |
EN 50082-2 |
| Emitted interference: |
EN 50081-1 |
Your selection: TA202.
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| TA202.002AXA1 | €475.00 | TA202.002AXA1 IVO Tachometer | | |
| TA202.012AXA1 | €535.00 | TA202.012AXA1 IVO Tachometer | | |
| TA202.013AXA1 | €420.00 | TA202.013AXA1 IVO Tachometer | | |
| TA202.022AXA1 | €500.00 | TA202.022AXA1 IVO Tachometer | | | | |
All mentioned prices are excluding VAT
| If the desired model is not shown in the list of prices, price is on request |
|
|
