View Larger Image
|
|
NE218
Multifunctional Counter with two presets |
IVO multifunctional counter with two presets. Can be used in a wide variety of applications. Can be programmed as preselection counter, time meter, totalizer.
Block diagram
Pin assignment |
 Main counter with two presets | | Scaling can be programmed 0.0001...9999.99 | | Interface RS485, RS422 |
| | Start value can be programmed | Preselection mode can be programmed:
- Progressive, Principal preselection
- Parallel comparison
- Trailing preselection (P1) |
|
 |
| Display: |
7-segment LED-display
6-digit dis. of real value, 14 mm high
Decimal point can be programmed
Suppression of leading zero
Minus sign for negative values |
| Operation, keypad: |
Front membrane w. short-stroke keys |
| Front dimensions: |
DIN housing, 96 x 48 mm |
| Mounting: |
Front installation |
| Fastening: |
Clamping frame |
| Weight: |
Version AC: ca. 350 g
Version DC: ca. 250 g |
| Type of connection: |
Plug-in screw terminals
Grid 5.08 mm / 3.81 mm |
| Core cross-section: |
Max. 1.5 mm2 |
| Housing material: |
Polycarbonate black, UL 94V-0 |
| Membrane material: |
Polyester |
| Supply voltage: |
Choice of two voltages via switch on device. When supplied, always higher voltage adjusted.
115 / 230 VAC ±10 % (50 / 60 Hz)
24 / 48 VAC ±10 % (50 / 60 Hz)
24 VDC ±10 %, 5 % residual ripple |
| Power consumption: |
5 VA, 4 W |
| Sensor supply: |
12...26 VDC / 85 mA |
| Signal inputs: |
Comparator inputs
PNP, NPN or AC logic
Voltage level 4...40 V
Input resistance ca. 3 kOhm |
| Input counting rate: |
Can be programmed to 3 Hz, 25 Hz, 10 kHz |
| Control inputs: |
2 control inputs for reset, stop, hold, print, etc. |
| Signal outputs: |
Can be programmed as momentary or permanent signals
Impulse time can be programmed 0.01...99.99 s |
| Relay signal outputs: |
2 floating relays can be programmed as normally open or normally closed contact
Max. swit. voltage 250 VAC/110 VDC
Max. swit. power 1 A
Max. swit. capacity 150 VA/30W |
| Data storage: |
> 10 years via EEPROM |
| Operation modes: |
To be programmed as adding or subtracting |
| Counting mode of signal inputs A / B: |
UP / DOWN, A - B, A + B, A 90° B x1, A 90° B x2, A 90° B x4 |
| Ambient temperature: |
0...+50 °C |
| Storage temperature: |
-20...+70 °C |
| Relative humidity: |
Max. relative humidity 80 %, at 25 °C, non-condensing |
| Protection: |
Front IP 65 to DIN 40050 |
| General rating: |
EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2 |
| Interference immunity: |
EN 50082-2 |
| Emitted interference: |
EN 50081-1 |
Your selection: NE218.
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| NE218.012AX01 | €305.00 | NE218.012AX01 Multifunctional Counter | | |
| NE218.013AX01 | €380.00 | NE218.013AX01 Multifunctional Counter | | | | |
All mentioned prices are excluding VAT
| If the desired model is not shown in the list of prices, price is on request |
|
|
