View Larger Image
|
|
HPSA-R
For Nip / Rubber rollers and Cylindrical materials |
3 Models:
HPSA-R20 - roller diameters up to 40mm
HPSA-R35 - roller diameters up to 70mm
HPSA-R55 - roller diameters up to 110mm
For cots, pressure rollers and many other rubber coated rollers, etc. The correct Shore A hardness of the cots is a critical factor to get the desired yarn structure and quality. As cots are abrasive, the hardness should be checked from time to time as they age.
|
 Constant-pressure indicating system assures uniform test pressure eliminating false readings due to differences between operators. | | Supplied in a foam-fitted carrying case. |
| | Operation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line. | | Standard Memory Pointer to capture peak measurement. |
|
Measuring Suggestions
| 1. | Whenever possible, a Durometer measurement should be taken at least 12 mm (approx. 0.500") in from the edge of a sample, as the hardness characteristic of any sample tends to change at the edges. |
| 2. | Whenever possible, the thickness of a sample should exceed 6 mm (approx. 0.250"). If the sample is thinner then this, then the sample can be backed with a sample of the same material to increase the thickness. |
| 3. | Test Coupons or test blocks (rubber or plastic) should not be used for calibration verification. As all samples are subject to characteristic changes over time along with temperature and lighting conditions, the rated Shore value when supplied as new can and will vary with age. Proper calibration verification requires independent confirmation of the internal spring forces along with the verification of the pin displacement vs. the indicated value on the scale. |
|
 |
PTS-HP
Durometer Test Stand |  |
 Mechancal Lever-operated Test Stand for use when precise positioning is required on the test sample (i.e. o-ring, etc.).
Operation is as simple as rotating lever until shell on durometer reaches red line. | | | Click image for more info
|
| The HP series is supplied as a complete kit with the gauge and Calibration Certificate in a foam-fitted carrying case. |  |
| Work Face Radius: |
HPSA-R20 - 20mm
HPSA-R35 - 35mm
HPSA-R55 - 55mm |
| Indenter: |
Cone 35°, 1,3 mm Ø |
| Typical applications: |
Hardness of elastomers and rubber etc. |
| Depth of indentation: |
0 - 2,5 mm |
| Test pressure: |
approx. 12,5 N |
| Measuring spring force: |
0,55 - 8,065 N |
| Display range: |
0 - 100 Scale |
| Scale diameter: |
56 mm |
| Working face: |
16 mm Ø = 2 cm² |
| Weight, net (gross): |
approx. 300 g (500 g) |
| Dimensions: |
50 x 50 x 110 mm (L x W x H) |
| Warranty: |
1 year |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| HPSA-R20-M | €310.00 | HPSA-R20-M Complete Kit | | |
| HPSA-R35-M | €310.00 | HPSA-R35-M Complete Kit | | |
| HPSA-R55-M | €310.00 | HPSA-R55-M Complete Kit | | |
| Accessories |
| PTS-HP | €0.00 | PTS Durometer Test Stand | | | | |
All mentioned prices are excluding VAT |
|
