View Larger Image
|
|
DCF-900
Low Cost Coating Thickness Gauge - Measures Coatings On Steel |
Measuring Range 0.1-40.0 mils (1-999 µm)
DCF-900 measures the thickness of plating,paint, coatings and galvanizing on iron or steel...more accurately, dependably and economically!
|
 Measures to 0.01 mil (0.1 µm), automatically rounding off to the nearest 0.1 mil (1 µm). | | Dependable accuracy over the entire range of the gauge, not just at "calibration check" points. | | Calibration to NIST standards is available upon request. | | Continuous reading update detects soft coatings as probe tip "sinks" into them. | | Keypad-selectable English or metric units. |
| | The DCF-900 and include the gauge and probe, a bare test plate, two precision calibrations shims & instructions, all in a foam-fitted carrying case. | | Remote probe permits easy access for difficult, hard-to-reach places. | | Longer lasting, driftless calibration Set it and forget it for long periods of time and from job to job | | Very reliable operation Consistent, repeatable measurements |
|
| Coating Thickness Standards | Ferrous (Fe) & Non-Ferrous (NFe) versions are offered Set includes three (3) coated plates of certified thickness plus one (1) uncoated zero plate in a durable vinyl folder. Each plate is marked in both mils and microns Each plate measures 1.375" x 1.375" |  | | | Click image for more details
|
| 3000-IRP | Archivable up to 5 years, if dryly stored without UV exposure Integrated IrDA infrared interface Speed of printing: 16 lines/sec |  | | | Click image for more details
|
| TS-5CG | |  | | | Click image for more details
|
|
| Range: |
0.1-40.0 mils (0-999 µm) |
| Resolution: |
0.1 mil (1 µm) |
| Accuracy: |
0-10 mils: ±0.1 mil
10-40 mils: ±1% of reading |
| Probe: |
Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable |
| Battery/Life: |
9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use |
| Dimensions: |
5.7" x 3.1" x 1.5"
(145 x 79 x 38 mm) |
| Weight: |
9 oz. (250 g) |
| Temperature Limits: |
Material: 15 to 140° F (-10 to 60° C)
Ambient: 32 to 125° F (0 to 50° C) |
| Warranty: |
One (1) year |
 |
Minimum Radius
for Convex Surfaces |
0.375" (9.5 mm) |
| Minimum Radius
for Concave Surfaces |
2.5" (63.5 mm) |
 |
Minimum Headroom |
2.5" (63.5mm) |
 |
Minimum Sample
Diameter |
0.5" (13 mm) |
 |
Minimum Substrate Thickness - F |
0.020" |
| Minimum Substrate Thickness - NFe |
NA |
| The DCF-900 is supplied as a complete kit including gauge, ferrous zero plate, 2 plastic test shims and instruction manual in a foam fitted, hard plastic carrying case. |  |
| item |
Price |
Description |
In Cart |
 |
| Product(s) |
| DCF-900 | €469.00 | DCF-900 Complete Kit | | |
| Accessories |
| DKDCAL | €100.00 | Adds DKD calibration certificate | | | | |
All mentioned prices are excluding VAT |
|
